When it comes to replacing your fenders on your 2010 10x6 Hallmark Transport Trailer you indeed can install The Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13 inch to 15 inch - Qty 1 # HP96VR.
When attaching the fenders # HP96VR to your trailer you will need The Mounting Brackets for Trailer Fender - 13 inch/14 inch/15 inch Wheels - Galvanized Steel - Qty 2 # CE26098G-2 you will not be able to attach the fenders directly to the trailer. 2 brackets are needed to mount... view full answer...
I can provide you with some great options for Bolt-on tandem axle fenders. But without knowing your wheel size and how long of a fender you need I can't say for sure which ones you will need.
Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers # HP74VR (15"-16" wheels, 72" fender length) Tear drop style
Tandem Axle Trailer Fenders for Enclosed Trailers # HP57VR (15"-16" wheels, 72" fender length) Non-Tear drop
Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers # HP24VR... view full answer...
The Jeep-Style, Single-Axle Trailer Fender, # HP76VR, can be bolted on to a trailer but you would have to make sure it is secure to the trailer, will not rub the wheels, and is centered. The biggest issue is to make sure it is secure. It will require drilling into both the fender and the trailer as you are aware. It would be best for this fender to be welded on. With an aluminum trailer and steel fender, this will not be feasible, so it would be better to find the best match fender for... view full answer...
You can mount the fenders directly to the trailer frame through the fender skirt on the back of the fender. I would recommend using large washers if you drill through the fender skirt and attach the fender directly to the trailer frame.
If mounting directly to the trailer frame is not possible on your trailer, you will need to use brackets to attach the fenders. We have the Galvanized Steel, L-Shaped, Bolt-On Brackets, item # PF775-BKT-2, that could be used to mount these fenders, # F008543,... view full answer...
The Backing Plate for Single Axle Trailer Fender - 30" Long x 12" Tall # HP42FR will not a direct fit for the fender # HP29VR. The backing plate is designed to directly fit the fender # HP36VR, however with very slight adjustments, it can work well. This is the best option we carry to closely fit that fender.
With any of these trailer fender options, you will still want to use fender brackets like the Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty... view full answer...
Yes, you could use a Pre-Cut Fender Back for Redneck Trailer Fender, part # 10FB-32R.
Or if you wanted a fender back that is slightly wider you could get a Pre-Cut Fender Back for Redneck Trailer Fender, part # 12FB-32R. view full answer...
Yes, you could use a Pre-Cut Fender Back for etrailerTrailer Fender, part # 10FB-32R with the # HP29VR.
Or if you wanted a fender back that is slightly wider you could get a Pre-Cut Fender Back for Redneck Trailer Fender, part # 12FB-32R. view full answer...
The research I have done on the Venture boat trailer fenders shows the fender not having side steps like the Fulton Single Axle Trailer Fender with Top and Side Steps - Silver Plastic - 14" Wheels - Qty 1 Item # F008594. If you are wanting to upgrade to a fender with side steps you may have to add brackets for the steps. If you are just wanting replace the factory fenders, I recommend the Fulton Single Axle Trailer Fender with Top Step - Black Plastic - 14" Wheels - Qty 1 Item # F008554... view full answer...
With the measurements that you have provided for your current fenders, it sounds like the CE Smith Single Axle Trailer Fender, # CE17100ATB, would be a great replacement option. To mount these fenders you could use Mounting Brackets for Trailer Fender, # CE26098G-2. These brackets are sold in pairs and one pair is required for each fender.
I have also included a link to the other fenders that we offer which are similar in size to your current fenders. view full answer...
The etrailer brand Trailer Fender you referenced, part # HP29VR, is designed to be welded on, but some customers have drilled through the small lip on the fender when installing. We do have another option that may work for you.
I recommend the etrailer brand Trailer Fender With Backing, part # HP36VR. This fender, like the fender you referenced, is a single-axle fender made of 16 gauge steel, and is designed for 14 to 15 inch wheels. I have attached a product review video for this fender... view full answer...
The Fulton Trailer Fenders part # F008583 that you referenced could be installed on your current trailer, but it won't be a direct fit replacement for the steel fenders you currently have/had.
On nearly every fender we sell like this there will be an element of fabrication required to install it on a trailer that previously had steel fenders. You will need to come up with a way to secure the fender to your trailer using the current mounts you have, (or what's left of them).
If you current... view full answer...
I recommend using the Fulton Single Axle Trailer Fender # F008542 if you are wanting to mount the fender on the inner wheel flange.
The Fulton Single Axle Trailer Fender # F008540 uses Mounting Brackets # CE26065PGA to hold the fender in place. It uses these brackets to stabilize the fender as the limited stucture will not provide enough stability for the fender if mounted by the inner fender well. view full answer...
The Fulton Single Axle Trailer Fenders with Top and Side Steps - White Plastic, # F008574-2, are a pair of fenders that are designed for a single axle trailer with 14 inch wheel. These are very close to the fenders you submitted a picture of as well.
The overall dimensions of the fenders is 9-5/8 inches wide x 42-5/8 inches long x 12-3/4 inches tall. The top step measures 8 inches wide.
We do not have any reference for replacement parts for the Shoreland'r trailer. If the measurements... view full answer...
The Aluminum Tread Plate, Jeep-Style, Single-Axle Trailer Fender, item # HP96VR is designed for a weld on application and putting screws and washers through the lip on the inside of the fender would most likely not last. If these fenders were to be installed on a steel trailer you would need to have an aluminum mounting bracket welded to the inside edge of the fenders that could be used to stiffen the fender and give additional mounting points.
We do have steel fenders available that should... view full answer...
We have the mounting brackets you will be needing to mount the CE Smith Single Axle Trailer Fender, # CE17937G.
The CE Smith Brackets for Trailer Fenders, # CE26098G-2, will allow you to connect the CE Smith fenders to your trailer. The brackets, like the fenders, are made of galvanized steel and are sold in a pair. Enough to install one fender per side of the trailer. view full answer...
You should be able to mount the Fulton Trailer Fender, # F008550, to the side of your camper trailer. Depending on the trailers construction you may need to use a mounting bracket and some carriage bolts to utilize the square attachment holes in the front and rear of the fender, or you may be able to bolt the fender directly to the side of the trailer through the fender skirt on the back side of the fender. view full answer...
I might have a solution for you. However, the CE Smith Fender # CE19504 is not available in the color grey.
Fulton has the Single Axle Trailer Fenders, # F008594-2, that are silver in color. This fender is the closest color match to grey that we carry in trailer fenders for 14 inch wheels. This pair of fenders are similar in length of the CE Smith fenders as well as how they will mount to you trailer. view full answer...
The CE Smith Single Axle Trailer Fender part # CE17100ATB that you referenced has a radiused lip on both sides of the fender. It can still be bolted on though as the fender lip does go flat. It will set flush to the side of your trailer, but the round radius lip of the trailer will make the shoulder of the fender sit away from the surface of the trailer. view full answer...
I did not find anything on a HP54VK trailer fender, If you meant the # HP54VR Tandem Axle Teardrop Trailer Fenders, we do not have a custom fit fender backing plate that fits the # HP54VR.
However, we do have the Backing Plate for Tandem Axle Trailer Fender # HP72FR which can be cut to size to use on the Tandem Axle Teardrop Trailer Fenders # HP54VR. view full answer...
Yes you certainly can. In order to bolt-on a set of metal weld-on fenders such as the Single Axle Trailer Fender part # HP29VR you will need a set of mounting brackets such as the Mounting Brackets for Trailer Fender part # CE26098G-2. If you do not have a 14" or 15" wheel, you will need to match the correct the trailer fenders to your wheel size in addition to matching the mounting bracket to your trailer fenders. view full answer...
Go To Results